We have a backplate for the newer OSTC 4 (2020 and later) with a recess for the charger.
But you can see the orientation in the attached image.
attachment=0]positionierung.jpg[/attachment]
Matthias
Search found 4334 matches
- Thursday 16. November 2023, 12:55
- Forum: OSTC 4
- Topic: TC switched to bootloader
- Replies: 12
- Views: 107674
- Wednesday 15. November 2023, 22:11
- Forum: OSTC 4
- Topic: TC switched to bootloader
- Replies: 12
- Views: 107674
Re: TC switched to bootloader
Hi,
3 Options: Connect with "OSTConf" App and check/update firmware, hard reset with a magnet (Put on charger, trigger the reset with a magnet on the left housing side (or right if you have flipped the screen) or remove battery and re-insert it.
Regards,
Matthias
3 Options: Connect with "OSTConf" App and check/update firmware, hard reset with a magnet (Put on charger, trigger the reset with a magnet on the left housing side (or right if you have flipped the screen) or remove battery and re-insert it.
Regards,
Matthias
- Wednesday 15. November 2023, 15:30
- Forum: OSTC 4
- Topic: TC switched to bootloader
- Replies: 12
- Views: 107674
Re: TC switched to bootloader
Press "Exit" to start the unit normally.
regards,
Matthias
regards,
Matthias
- Thursday 9. November 2023, 15:46
- Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
- Topic: OTSC+ (Sport) schaltet sich nicht ein
- Replies: 4
- Views: 29317
Re: OTSC+ (Sport) schaltet sich nicht ein
Kontaktproblem. Geht die Batterie sauber bis unten rein (Fremdkörper, manchmal "klemmt" die ein wenig weil die minimal unterschiedliche Durchmesser haben? Und die Batteriekappe muss gut fest zu sein, damit ein guter Kontakt zwischen Kappe und Gehäuse da ist.
Gruß,
Matthias
Gruß,
Matthias
- Thursday 9. November 2023, 15:16
- Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
- Topic: Dekogas während der Simulation hinzufügen
- Replies: 6
- Views: 60757
Re: Dekogas während der Simulation hinzufügen
Hallo,
Die Reaktion auf das "extra" Gas ist in der Tat so wie gewollt. Du kannst konfigurierte Deko-Gase UW aktivieren und eben direkt auf ein Extra-Gas wechseln. Aber Du kannst keine Gase UW konfigurieren, die dann später im Verlauf des TG genutzt werden sollen.
Gruß,
Matthias
Die Reaktion auf das "extra" Gas ist in der Tat so wie gewollt. Du kannst konfigurierte Deko-Gase UW aktivieren und eben direkt auf ein Extra-Gas wechseln. Aber Du kannst keine Gase UW konfigurieren, die dann später im Verlauf des TG genutzt werden sollen.
Gruß,
Matthias
- Monday 30. October 2023, 13:02
- Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
- Topic: Deko time at 6m countdown is much longer than shown
- Replies: 4
- Views: 41269
Re: Deko time at 6m countdown is much longer than shown
Then you need to disable the deco gas (You can do this during the dive, too). The OSTC assumed you would be changing to this gas (Which would have accelerated your deco). That resulted in the discrepancy you saw.
Regards,
Matthias
Regards,
Matthias
- Monday 30. October 2023, 12:27
- Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
- Topic: Deko time at 6m countdown is much longer than shown
- Replies: 4
- Views: 41269
Re: Deko time at 6m countdown is much longer than shown
Hello,
Can you post your Gaslist for this dive (As shown in the logbook)?
Regards,
Matthias
Can you post your Gaslist for this dive (As shown in the logbook)?
Regards,
Matthias
- Tuesday 24. October 2023, 13:42
- Forum: OSTC Mk.2, 2N and 2C (Sold between 2007 and 2014)
- Topic: USB OSTC users - please read!
- Replies: 0
- Views: 85064
USB OSTC users - please read!
Hi, We see corroded USB ports regularly because users continue to close the USB cap with a screwdriver all the way down. That might get the O-Ring damaged in the threads. Result is a leak and (worst case) end-of-life of the entire unit (The USB port is NOT replaceable in the 2C or 2N!). The USB cap ...
- Tuesday 24. October 2023, 11:14
- Forum: OSTC Mk.2, 2N and 2C (Sold between 2007 and 2014)
- Topic: OSTN 2n Comms issues
- Replies: 6
- Views: 60344
Re: OSTN 2n Comms issues
That's an "OSTC 2C" (It's written on the front, as well). If the USB port is not detected, try a different cable and/or clean the USB port with some contact cleaner or "WD40". We see corroded USB ports regularly because people continue to close the USB cap with a screwdriver all ...
- Tuesday 24. October 2023, 11:02
- Forum: OSTC Mk.2, 2N and 2C (Sold between 2007 and 2014)
- Topic: New 3.15 firmware
- Replies: 11
- Views: 64929
Re: New 3.15 firmware
Continue here: viewtopic.php?t=22482
- Tuesday 24. October 2023, 11:02
- Forum: OSTC Mk.2, 2N and 2C (Sold between 2007 and 2014)
- Topic: New 3.16 Firmware
- Replies: 0
- Views: 85013
New 3.16 Firmware
Hello, Today, we released the 3.16 stable for the USB-OSTC2 Series (2N/Mk.2/2C). Changes since 3.00 (Changes since 3.13) : BUGFIX: Vertical speed display NEW: Allow to set date > 31.12.2020 BUGFIX: Small language fixes CHANGE: Debug mode disabled (Hard-coded) NEW: Logbook shows markers with small or...
- Wednesday 18. October 2023, 16:16
- Forum: OSTC Mk.2, 2N and 2C (Sold between 2007 and 2014)
- Topic: OSTN 2n Comms issues
- Replies: 6
- Views: 60344
Re: OSTN 2n Comms issues
Hi,
Is this an OSTC 2N (With a USB port on the side)?
regards,
Matthias
Is this an OSTC 2N (With a USB port on the side)?
regards,
Matthias
- Monday 9. October 2023, 16:56
- Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
- Topic: Safety stop on OSTC 2 firmware 10.75
- Replies: 3
- Views: 31036
Re: Safety stop on OSTC 2 firmware 10.75
It was posted before, but the safety stop in hwOS (the firmware for all "small" OSTC) works as follows: - The dive must have been deeper than 10m and lasted longer than 1min. - When surfacing, there must be no deco commitment at 10m depth - A countdown of 3min is then displayed (to the sec...
- Monday 9. October 2023, 09:39
- Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
- Topic: Silicon sleeve
- Replies: 37
- Views: 215532
Re: Silicon sleeve
Thanks! Looks very nice.Acorchia wrote: ↑Sunday 8. October 2023, 21:25 If any one is interested I build a hard cover for OSTC 2 to print.
https://www.thingiverse.com/thing:6255991
Regards,
Matthias
- Tuesday 3. October 2023, 15:42
- Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
- Topic: OSTC Sport - Unable to connect on Bluetooth for Firmware Upgrade
- Replies: 13
- Views: 76475
Re: OSTC Sport - Unable to connect on Bluetooth for Firmware Upgrade
In the new OSTC+, there is an option "Reset Bluetooth" in the reset menu. This will un-pair any devices from the OSTC+ and usually does the trick if you have issues. Also, the OSTC+ Bluetooth may not work with a (low quaility) 1,5V battery. The recommended 3,6V rechargeable LiIon battery o...
- Monday 25. September 2023, 10:54
- Forum: OSTC 4
- Topic: hwOS4: New Firmware 1.6.5 with RTE 3.20
- Replies: 12
- Views: 107206
Re: hwOS4: New Firmware 1.6.5 with RTE 3.20
Hi,
We have updated this thread with the 1.6.5. This fixes the "Big Font" issue in the SYS2 menu.
Regards,
Matthias
We have updated this thread with the 1.6.5. This fixes the "Big Font" issue in the SYS2 menu.
Regards,
Matthias
- Wednesday 20. September 2023, 10:48
- Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
- Topic: Surface pressure compensation
- Replies: 6
- Views: 29399
Re: Surface pressure compensation
Hello,
The OSTC+ will use the surface pressure reading for the 0m reference. So, some hPa more or less will NOT affect your depth reading and this is not critical. A defective pressure sensor will show (intentionally) 9999hPa on the surface.
regards,
Matthias
The OSTC+ will use the surface pressure reading for the 0m reference. So, some hPa more or less will NOT affect your depth reading and this is not critical. A defective pressure sensor will show (intentionally) 9999hPa on the surface.
regards,
Matthias
- Wednesday 20. September 2023, 10:42
- Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
- Topic: Frage zur TTS
- Replies: 4
- Views: 25968
Re: Frage zur TTS
Hallo,
wenn das Dekogas als "Deco" konfiguriert ist UND eine Wechseltiefe eingestellt ist, wird es in die TTS einbezogen (Bis zu 5 Gase gleichzeitig). Zudem wird Dir dann auf der Wechseltiefe auch der Gaswechsel durch gelbes Blinken des aktiven Gases der Wechsel empfohlen.
Gruß,
Matthias
wenn das Dekogas als "Deco" konfiguriert ist UND eine Wechseltiefe eingestellt ist, wird es in die TTS einbezogen (Bis zu 5 Gase gleichzeitig). Zudem wird Dir dann auf der Wechseltiefe auch der Gaswechsel durch gelbes Blinken des aktiven Gases der Wechsel empfohlen.
Gruß,
Matthias
- Wednesday 20. September 2023, 10:40
- Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
- Topic: OSTC PLUS Battery problems
- Replies: 2
- Views: 24412
Re: OSTC PLUS Battery problems
Hello,
Either the battery leaked or you had some water inside the battery compartment. In either way, we need to service the unit at our place (New battery contact, new battery cap, new battery). Please contact us via info@heinrichsweikamp.com in this case.
regards,
Matthias
Either the battery leaked or you had some water inside the battery compartment. In either way, we need to service the unit at our place (New battery contact, new battery cap, new battery). Please contact us via info@heinrichsweikamp.com in this case.
regards,
Matthias
- Tuesday 19. September 2023, 12:48
- Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
- Topic: FAQ: Batteries in the OSTC plus
- Replies: 1
- Views: 42085
Re: FAQ: Batteries in the OSTC plus
Neuere OSTC+ (So ab 2022) wurden von uns mit einem Akku ausgeliefert, welcher auch über ein Mikro-USB Buchse geladen werden kann. Damit kann man den Akku auch ohne den Qi-Lader aufladen, falls dieser entladen sein sollte und sich nicht über das Ladepad laden lässt. Newer OSTC+ (So from 2022) were su...
- Saturday 16. September 2023, 19:39
- Forum: OSTC 4
- Topic: OSTC Tools for Windows - HWOS Config for Android
- Replies: 48
- Views: 632494
Re: OSTC Tools for Windows - HWOS Config for Android
Hallo, Ihr könnt folgendes probieren: Menu -> SYS2 -> Reset Menu -> Reboot Firmware Dann _sofort_ (Noch bevor das logo erscheint) dreimal kräftig auf die rechte Taste drücken. Es erscheint ein Bildschirm wie angehängt. Aus diesem Modus kannst man das Update nochmal per App starten. Wir nutzen die Ap...
- Thursday 14. September 2023, 14:01
- Forum: OSTC 4
- Topic: hwOS4: New Firmware 1.6.2 with RTE 3.10
- Replies: 13
- Views: 85250
Re: hwOS4: New Firmware 1.6.2 with RTE 3.10
Continue here: viewtopic.php?t=22469
- Thursday 14. September 2023, 14:01
- Forum: OSTC 4
- Topic: hwOS4: New Firmware 1.6.5 with RTE 3.20
- Replies: 12
- Views: 107206
hwOS4: New Firmware 1.6.5 with RTE 3.20
ENGLISH below. Hallo, Die neue Firmware 1.6.5 ist nun veröffentlicht. heinrichsweikamp.com Anleitung zur Installation: https://forum.heinrichsweikamp.com/viewtopic.php?f=7&t=19186 (Je nach aktueller Version kann es nötig sein, das Update zweimal zu starten. Der OSTC4 gibt dazu nach dem Update nö...
- Wednesday 13. September 2023, 16:53
- Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
- Topic: OSTC2 startet nicht mehr
- Replies: 6
- Views: 7153
Re: OSTC2 startet nicht mehr
Hallo,
Da passt Spannung und %-Wert zusammen. Wieviel hat er dann denn jetzt bei einem normal TG verbraucht?
Gruß,
Matthias
Da passt Spannung und %-Wert zusammen. Wieviel hat er dann denn jetzt bei einem normal TG verbraucht?
Gruß,
Matthias
- Wednesday 13. September 2023, 08:34
- Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
- Topic: OSTC2 startet nicht mehr
- Replies: 6
- Views: 7153
Re: OSTC2 startet nicht mehr
Top, danke für die Rückmeldung!
Wenn Du im Logbuch schaust, bei dem letzten gespeicherten TG, welche Spannung (V) und welcher %-Wert für die Batterie wurden da abgelegt?
Gruß,
Matthias
Wenn Du im Logbuch schaust, bei dem letzten gespeicherten TG, welche Spannung (V) und welcher %-Wert für die Batterie wurden da abgelegt?
Gruß,
Matthias